Insights · guide

How to check a VR headset before accepting a rental

Drafted with Insight · edited by The WE ARE VR team

development

Ten careful minutes at handover can prevent hours of troubleshooting on site.

What's the problem?

A rental headset may power on and still be unfit for your event.

Scratched lenses become obvious once someone reads small text. A controller may connect, yet lose tracking during fast movement. An ageing battery can show 60% and then fall quickly. Logged-in personal accounts can expose messages, purchases or saved payment details.

These faults are painful when a client, curator or audience is waiting. Johannesburg venues also add practical constraints. You may have limited setup time, unreliable Wi-Fi or no nearby replacement unit.

The handover is your best chance to find trouble while the supplier is present.

Do not accept “it worked yesterday” as a test. Yesterday is not in your venue schedule.

What's the solution?

Run the same ten-minute inspection for every headset. Use your phone timer and record visible damage before touching anything.

Minute one: inspect the shell, straps and facial interface. Look for cracks, loose fittings, missing padding and damaged charging ports. Check whether the face padding is clean and dry. Photograph existing marks beside the rental serial number.

Minute two: inspect both lenses under a bright phone torch. Tilt the headset slowly. Look for scratches, cloudy patches and sun damage. Sun damage often appears as a fixed bright or dark mark inside the display. Never place the lenses facing direct sunlight.

Minutes three and four: start the headset and read small menu text. Test each eye separately by closing one eye. Adjust the lens spacing if the headset allows it. The picture should remain stable, without fixed marks or strong flickering.

Minutes five and six: check tracking. Tracking is the system that measures headset and controller movement. Turn your head slowly, crouch, stand and walk a small square. The virtual view should follow without jumping or drifting.

Confirm that the boundary system works. This is the safety outline marking your usable floor area. Draw a temporary boundary and check whether it appears when you approach the edge.

Minutes seven and eight: test every controller button, trigger and thumbstick. Rotate each thumbstick slowly while watching its virtual movement. Check controller battery levels. If the controllers use removable batteries, ask for a fresh spare pair.

Minute nine: inspect headset battery level and charging. Connect the supplied cable and confirm the charging symbol appears. Also check the charger, plug and cable for bent pins or exposed wire.

Minute ten: check accounts and software. Confirm which account is signed in, whether you may use it, and whether the required experience launches. Watch for update prompts, login requests and forgotten passwords. Agree who can approve purchases or account verification during the rental.

For example, imagine you are installing a six-headset activation in Braamfontein. One controller drifts during the handover test. Replacing it at the supplier takes minutes. Discovering it during the first public session can stop an entire station.

Finish by writing the headset serial number, battery level and faults on the delivery note. Both parties should keep a copy.

What's next?

  1. Save this six-part checklist: damage, lenses, tracking, controllers, batteries and accounts.
  2. Test your own headset with the same timer before your next client demonstration.
  3. Ask your rental supplier to include serial numbers, chargers and spare batteries in writing.

Share your rental checklist with the Jozi XR community, or ask us about a fault you cannot identify.

The WE ARE VR team