Insights · guide

How to record spatial audio with four channels

Drafted with Insight · edited by The WE ARE VR team

development

You can capture useful spatial audio with one four-capsule recorder and careful placement.

What's the problem?

Spatial audio often gets introduced through impressive microphone arrays. Those systems can locate sound with fine detail, but they are costly, heavy and slow to set up.

Most Jozi XR teams need something simpler. You may be recording a gallery, an interview, a performance, or street sound for a 360° scene. You need direction and atmosphere, not a laboratory.

A common mistake is placing four ordinary microphones around a room and calling the result spatial. Their different positions create timing gaps. Their gains and frequency responses may also differ. Decoding that recording later becomes guesswork.

Another mistake is monitoring only through headphones and ignoring the headset. A mix can sound wide on a laptop, then feel rotated, distant or tiring in VR.

What's the solution?

Start with first-order Ambisonics. This is a four-channel format that describes sound arriving from the front, sides, above and below. It gives you a steerable sound field rather than four separate speaker tracks.

The shortest practical setup is a recorder with four matched capsules arranged as one Ambisonic microphone. A Zoom H3-VR is a familiar example. It records four synchronised channels without a separate mixer or recorder. Similar Ambisonic microphones work too, but some need a recorder with four clean, matched inputs.

Mount the recorder at the future listener's head position. Keep it upright, note which side faces forward, and avoid touching the stand during recording. Set the gain so loud moments stay below clipping. Clipping is digital distortion caused when the signal exceeds the recorder's limit.

Record 30 seconds of room tone before the action. Room tone is the natural background sound of the space. In Johannesburg, that might include traffic, ventilation, generators or voices outside the venue. Those sounds are part of the recording, whether invited or not [generators rarely respect a call sheet].

For a small exhibition in Braamfontein, place the recorder where a visitor will stand. Capture a performer walking around it, then repeat the movement while wearing the target headset. If left and right feel reversed, fix the microphone orientation or decoder settings before recording the full session.

The microphone may store A-format, which means the raw capsule signals. Your software converts this into B-format, a standard set of directional channels used by spatial audio tools. Keep the raw files. Export a B-format master for editing, plus a binaural preview for headphones. Binaural means a two-channel version shaped to imitate how human ears receive direction.

This setup will not match a large array's sharp positioning or post-production control. It will capture a convincing room and broad movement with far less kit.

What's next?

  1. Borrow or rent one four-capsule Ambisonic recorder and a stable stand. Label its front before leaving the studio.
  2. Record a 60-second test in the real venue. Include speech, movement, room tone and the loudest expected sound.
  3. Decode the test, load it into the target headset, and check orientation, noise, clipping and comfort before booking the full session.

Share your test recording with the Jozi XR community, or ask us where the workflow gets stuck.

The WE ARE VR team